飞机吊舱热系统计算机仿真研究

建立了电子吊舱热系统仿真模型,并利用仿真软件对其进行动态仿真研究,得到了吊舱冷负荷及主要温度参数沿一定飞行包线的变化情况, 辅助完成了制冷系统的选型及校核检验工作,并为吊舱的结构参数优化提出了合理性建议.研究结果表明动态仿真研究为吊舱制冷系统的选型及设计提供了先进的计算分析工具.     

采用斜坡凹槽稳焰器强化H2超燃的数值研究

用迎风TVD格式求解三维多组分体系的全N－S方程，化学反应源项采用点隐处理，H2和空气的超燃模型用11组分、23步基地反应模型描述，得到了凹槽燃烧室不同截面组元、当量比、压力、温度等值线和速度场的分.布计算结果表明：凹槽稳焰器的回流区可提供高温自由基，有助于超燃点火；火焰在凹槽内和凹槽后斜坡的尾迹中驻定。结果对定量认识凹槽H2超燃流场、设计高效率和优化结构的一体化凹槽有着重要意义。     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

生态环境材料——社会可持续发展的物质基础

 生态环境材料是近年来在先进材料研究中提出的一个新研究领域。简要介绍了生态环境材料概念的产生、发展及哲学基础,从材料环境协调性评价、材料和物质的再生循环、与生态系统相协调的材料与工程、环境工程材料、与材料科学相关的生态工程等几方面对生态环境材料研究的最新进展进行了评述。     

离心喷嘴雾化特性的理论计算

本文根据动量守恒原理,分析了离心喷嘴的结构参数与喷嘴雾化特性(流量系数、喷雾锥角等)之间的关系,建立了相应的无粘理论计算模型.理论计算的结果与有关的实验数据相比较,符合程度较好.本文建立的理论计算模型对离心喷嘴雾化特性的研究,具有一定的参考价值.     

01420铝锂合金的搅拌摩擦焊接

对2 mm厚的01420铝锂合金薄板实现了搅拌摩擦焊接(FSW),分析焊接接头的微观组织形态,研究焊接工艺参数对搅拌摩擦焊接接头成型和接头性能的影响,并与氩弧焊接接头性能相比较.结果表明,当工艺参数选取得当时,焊缝成型较好,表面光洁,焊接接头的强度可达到母材强度的77%,接头的弯曲角可达到180°,均高于氩弧焊接接头.     

Electrolytic Passivation of Nitinol Shape Memory Alloy in Different Electrolytes

The corrosion behavior of the nitinol alloy was studied in various corrosion media of different Cl–ion concentrations. The results demonstrate that the Cl–ion concentration has significant influences on the corrosion behavior of the nitinol alloy. In order to enhance the corrosion resistance, protective films were generated on the surface of the nitinol alloy by means of the electrochemical passivation method, for which five different electrolytic solutions were investigated. The surface analysis indicates full growth of all samples pas-sivated in the different electrolytic solutions with layers, however, showing different morphological features. Without any defects like micro-cracks and pores, the surface of the samples passivated in the molybdate solution turns out smoother and denser than those pas-sivated in other solutions. It is shown that the electro-chemical passivation will reduce Ni content but increase Ti content in the surface, reaching the Mole ratio of Ti:Ni=9.01:1 on the outermost surface. Potentiodynamic polarization test demonstrates that the samples electrochemically passivated in the molybdate solution present a significant increase in breakdown potential due to titanium enrichment on the outermost surface.     

基于图像识别的发动机内窥智能检测系统研究

介绍了一种基于图像识别技术的航空发动机内窥检测的新方法，采用最大类间方差法计算二值化分割的最佳阈值，并将提取的图像特征输入神经网络进行分层识别，最后由专家系统对损伤程度进行了诊断。通过现场测试，证明了该方法的有效性和实用性．     

钛合金表面镍包石墨喷涂层的耐磨性能

为了提高钛合金的表面耐磨性,利用氧乙炔热喷涂枪,在TC4合金表面上制备出镍包石墨涂层。采用MXP-2000型销盘式摩擦磨损实验机,进行钛合金及其镍包石墨涂层的干摩擦磨损实验,并利用扫描电镜对磨损表面进行观察和分析。实验结果发现,镍包石墨涂层的摩擦系数只有钛合金的一半左右,前者磨损量为后者的1/6,说明镍包石墨涂层可以大大提高钛合金的表面耐磨性能。TC4合金的磨损机制以黏着磨损为主,喷涂层的磨损机制以磨粒磨损为主,喷涂层中的石墨润滑相是其耐磨性高的主要原因。     

Nb对富钛TiNiAl金属间化合物强化机制的影响

 采用力学压缩试验、扫描电镜和X射线衍射方法研究了Nb元素对于Ti₅₀Ni₄₂Al₈合金的力学性能和微观组织结构的影响。结果表明，Nb能够显著提高合金从室温到700 ℃之间的强度。在600 ℃时，Ti₅₀Ni₄₀Al₈Nb₂合金的压缩屈服强度和比强度分别为1 237 MPa和216 MPa/(g·cm^-3)，超过Rene95高温合金。微观组织观察及成分分析表明，Nb元素在基体和强化相Ti₂Ni（Al）中固溶，促进强化相的弥散析出和细化，并导致高强富Nb相的析出，从而提高了合金的强度。